A composite fails on light before it fails on anything else. Two photographs sit together when the light in them agrees about direction, hardness and colour, and no amount of masking rescues a subject lit from the left dropped into a scene lit from the right.
Ines assembles covers for a small press in Ljubljana: a woman on a stair, a sky from another country, a bird from a third photograph, one image by Thursday.
Four things have to agree, in this order
Direction first, because the eye reads it without being asked. Find the shadow in the background plate, note which way it falls, and reject any subject whose shadow falls the other way. That rejection costs a search and saves an afternoon.
Lighting checklist
Four light properties to match in strict priority order
Fixing grain or colour cannot save a cutout whose shadow points the wrong way, so check source plates from biggest signal down to finest texture.
- 01Match light direction firstReject any subject whose shadow falls opposite the background plate before masking
- 02Match shadow edge hardnessDirect sun needs crisp shadows while overcast light needs soft falloff; blurring the subject never fixes this
- 03Match colour temperatureUse a clipped curves layer to warm sunlit edges and cool shaded sides
- 04Match grain and depth of field lastAlign film noise and background lens blur so sharp elements sit inside the same lens
Discarding a badly lit source photo in minute two saves hours of masking work.
Hardness second: a hard sun gives a shadow with a sharp edge, an overcast sky gives one you can barely find. A sharp-edged subject in a soft-lit scene is the second most common tell, and it cannot be fixed by blurring the subject.
Colour third. Sunlight late in the day is warm and the shade under it is blue, and a subject shot under a window at midday carries neither. A curves layer clipped to the subject, warming the lit side and cooling the shadow side, does most of this in about a minute.
Grain and focus last, and they are the ones everybody forgets. Match the noise of the plate, then match the depth of field: a sharp bird against a background that falls off behind it belongs to no lens that exists.
The shadow is the join
A composite without contact shadow floats. Wherever the subject touches the ground there is a dark, tight, almost black patch a few pixels wide, and it is the single mark that tells the eye the two things are in the same room.
Grounding the subject
Two shadow layers moving outward from the point of contact
Without a tight dark seam right under the feet or base, even well-lit subjects appear to hover above the floor.
- Subject meets groundTight contact shadowPainted by hand on a multiply layer, dark, sharp, and only a few pixels wide
- 02Softening local falloffSpreads and lightens within a hand's width around the touch point
- 03Directional cast shadowLonger and softer, following the exact angle of existing shadows in the plate
Build both shadows on separate multiply layers so opacity stays adjustable until the final print check.
Paint the contact shadow by hand on a multiply layer. It is small, dark and sharp at the point of contact, and it spreads and lightens within a hand's width. Then the cast shadow, longer and softer, in the direction the plate's own shadows go.
Perspective is not scale
Match the horizon, not the size. If the camera in the plate was at chest height, the subject's own horizon has to sit at chest height too, which means a subject photographed from above cannot stand on a floor photographed from eye level however carefully it is scaled.
Camera viewpoint
Why matching scale fails when camera heights disagree
You can resize any layer in two seconds, yet perspective clues lock the subject to the original photographer's stance.
- Same camera heightSize scaling sits naturally in the sceneChest-height subject meets chest-height room without feeling pasted on
- Horizon lines align across figures
- Feet and floor plane share one perspective
- Mismatched viewpointLooks like a sticker at any scaleA subject shot from above cannot stand convincingly on an eye-level floor
- Resizing only changes apparent height, not camera angle
- Picking a matching source angle beats trying to warp perspective
Screen source photos by camera elevation before testing masks or scale.
This is why so many composites look like a sticker: the size is right and the viewpoint is not. Choose the source photograph for its camera height and everything after it gets easier.
One layer at the top, over everything
Finish with a grade over the whole stack. A single curves or colour balance layer at the top of the file pulls the plate and the subject into one set of colours, and it does in one move what an hour of matching each piece cannot.
Finishing layers
Two global layers at the top pull separate photos into one frame
Instead of endlessly tweaking isolated cutouts, finish the stack with shared colour and texture over everything underneath.
- Global colour gradeOne curves or colour balance layer across the whole file binds highlights and shadows together
- Full-canvas grain overlayUniform texture added above the grade erases differing camera sensors and noise patterns
Background plate and roughly matched cutouts underneath
Put grain above the final grade so colour adjustments do not distort the texture contrast.
Then add grain over the whole stack too, on top of the grade. Everything under it becomes one photograph because it shares one texture, and this is the last step of every composite worth keeping.
What to open
Generative fill, in Photoshop since 2023, replaces cloning a background outward by hand to extend a plate, and it is genuinely good at sky, wall and floor. There is no free tier. It is not good at anything with structure, so extending a stair by four steps is still a manual job and will be for a while.
Beyond manual cloning
Generative Fill for organic space vs Blender for repeat geometry
Neither helper replaces lighting judgment, yet each takes over a specific kind of heavy lifting depending on structure and volume.
- Photoshop Generative FillBuilt in since 2023; paid Creative Cloud only
- Extends sky, painted walls, and floors fast
- Breaks down on structured elements like stone stairs
- Ideal for quick plate expansion on one-off covers
- Blender shadow proxyFree 3D box and directional light setup
- Generates physically accurate cast shadows
- Too heavy for a single weekly book jacket
- Saves work by scene five in a forty-scene product shoot
Match the helper tool to geometry and repetition
Use simple manual cloning for stairs and save 3D shadow proxies for multi-scene product lines.
Blender is the free way to get a shadow that is actually correct, by putting a rough box where the subject is and letting a light throw it. For a cover a week that is too much machinery; for a product line photographed once and composited into forty scenes it is less work by the fifth scene.
Where it stalls: matching the subject to the plate
The instinct is to correct the cut-out until it fits, and the correction goes on for hours because the target keeps moving. Warm it, and now it is too warm against the sky; cool the sky, and the woman goes grey.
Where hours vanish
The middle-of-the-stack colour loop that never settles
Tuning each cutout against its neighbour turns colour matching into a moving target until you grade from the top.
Chasing piece-by-piece colour
- 01Warm the cutout figure
- 02Cool down the sky plate
- 03Readjust the figure again
- 04Exit via a ten-minute rough match
- 01Warm the cutout figureLooks too warm once compared against the background sky
- 02Cool down the sky plateMakes the woman's skin tone shift flat and grey
- 03Readjust the figure againA whole day disappears inside middle-stack adjustment layers
- 04Exit via a ten-minute rough matchStop early on pieces and finish the agreement with one top-level grade
Roughly right in ten minutes per piece beats chasing perfection before the global grade exists.
The fix is to stop correcting pieces and grade the whole thing. Get each piece roughly right, in about ten minutes each, then do the agreeing at the top of the stack where one adjustment moves everything together.
Almost everybody learns this the slow way, having spent a day on a composite that never quite settled, and the day is spent in the middle of the stack where no adjustment can ever be finished.
What it looks like when it goes wrong
The cover was a woman on a stone stair with a heron behind her, approved at screen size on a Tuesday. At 150 mm across on the printed jacket the heron had a shadow going left and the woman had one going right, which four proof readers and the author had all seen without seeing. Six hundred jackets. The photograph of the heron had been chosen in about ninety seconds, on the basis that it was a good heron.
One cover, three photographs
The audit that would have caught the heron
Three states, and the dash is the important one. A row nobody checked and a row that failed are opposite facts with opposite next actions.
Run this on the heron plate before spending an hour on its mask, not after
- NoShadows fall the same waythe plate's shadows go right, the bird's go left, which is why the jacket looks wrong at 150 mmNo
- YesShadow edges are equally hardboth plates were shot in direct sun, so both edges are sharpYes
- YesCamera heights matchthe stair is shot at chest height and so is the birdYes
- Not checkedGrain is the samenobody compared them at 100 per cent, and at jacket size it may not matterNot checked
- NoDepth of field agreesthe bird is sharp to its wingtip and the wall behind the stair is notNo
- NoContact shadow paintedthere is nothing under either foot yetNo
Two failed rows on a plate is a reason to find another photograph. It is almost always faster than the hour that follows a decision to keep this one.
The masks holding each piece in place come from cutting things out cleanly, including hair, and the stack they live in is non destructive editing, and why it matters. Where the retouching inside each piece should stop is skin, objects and restraint. What the program is for here is one level up, in pixels: retouching, compositing and screen design.